Biofix-NP

Anatomically designed low profile plate minimizes the need for intraoperative contouring and prevents soft tissue irritation due to hardware prominence.
The tapered bevelled plate end facilitates minimally invasive insertion.
The solid midsection provides the strength necessary to support the osteotomy gap.
Plates are not side-specific and can be used for the left or right tibia.
Use of Locking Head Screws provides angular stability.
Spacers ensure adequate distance between the plate and the periosteum and pes tendons. This preserves the vascularity and pes irritation.
Variable angles facilitates redirection of screws without adversely affecting the locking performance of that screw. The locking screws in this system can be angled up to 15 degrees off-center
The screw holes are numbered from A-D being proximal and 1-4 being distal to osteotomy
downslope in the holes A/B/C fixed angle ensures the screws are directed distally from the joint.
The System has three different types of plates to address three indications:

Hole numbers D & 1 are variable angled in all the three plates.
A variable hole no. D allows the screw to be directed as desired due to the small bone in the proximal segment of the osteotomy.
A variable hole no. 1 allows placement of hinge compression cortex screw and later change to a locking head screw in a different angle.
The Biofix™-NP (Cat. No. 10162) plate has additional variable angle hole no. B. This is to prevent tunnel coalition between the ACL tibial tunnel and the screw.
The Biofix™-NP (Cat. No. 10163) plate has additional variable angle hole nos. A and C. This is to prevent tunnel coalition between the medial meniscus trans-tibial repair tunnel and the screw.
Material: Titanium.

Product Category	Description
10161	Biofix™-NP locking osteotomy plate len. 100mm, 4 holes (2 variable angle for Tibial Osteotomy)
10162	Biofix™-NP locking osteotomy plate len. 100mm, 4 holes (3 variable angle for ACL with Osteotomy)
10163	Biofix™-NP locking osteotomy plate len. 100mm, 4 holes (4 variable angle for Meniscus Root Repair with Osteotomy)

Cat. No.	Screw Len. (mm)	Cat. No.	Screw Len. (mm)	Cat. No.	Screw Len. (mm)	Cat. No.	Screw Len. (mm)
10164	20	10170	32	10176	44	10182	65
10165	22	10171	34	10177	46	10183	70
10166	24	10172	36	10178	48	10184	75
10167	26	10173	38	10179	50	10185	80
10168	28	10174	40	10180	55	10186	85
10169	30	10175	42	10181	60	10187	90

Cat. No.	Screw Len. (mm)	Cat. No.	Screw Len. (mm)	Cat. No.	Screw Len. (mm)	Cat. No.	Screw Len. (mm)
10188	26	10191	32	10194	38	10197	44
10189	28	10192	34	10195	40	10198	46
10190	30	10193	36	10196	42	10199	48
						10200	50