Sports Medicine

New product innovation in arthroscopic surgery is the heart and soul of Biotek, which has resulted in the development of wide range of products for arthroscopic and minimally invasive orthopaedic surgical procedures. BIOTEK offers comprehensive range of products of sports medicine.

SLAP & BANKART Repair

FIBERKNOT� Ligament Anchors (All Suture) FIBERKNOT® Ligament Anchors (All Suture) View Details

FIBERKNOT® Ligament Anchors (All Suture)

FIBERKNOT� Ligament Anchors (All Suture)

FIBERKNOT® is an all suture anchor with smaller in size that does not mitigate strength

The FIBERKNOT® Soft Ligament Anchor is composed of ultra-high molecular weight polyethylene (UHMWPE) suture and is available in 1.5 mm (single loaded) and 1.8 mm (double loaded) sizes. FIBERKNOT® requires a smaller pilot hole compared to traditional anchors, minimizing bone removal and decreasing the overall anchor footprint, while still providing superior strength. The FIBERKNOT® delivery system is designed to provide a consistent, reproducible technique to eliminate the inconsistency seen with other all-suture anchors on the market

The curved and straight sleeves enable delivery around a curve and perpendicular placement for posterior SLAP and inferior Bankart repairs.

The drill ensures accurate pilot hole placement with both straight and curved guides. The average pull-out strength of FIBERKNOT® 1.5mm ligament anchor is 349.5 N* & FIBERKNOT® 1.8mm ligament anchor is 410.1 N*.

Ordering Information

10026 FIBERKNOT® Soft Ligament Anchor loaded with 1 pc Fiber, Dia. 1.5mm
10028 FIBERKNOT® Soft Ligament Anchor loaded with 2 pc Fiber, Dia. 1.8mm

Related Instrumentation

10040 Spear (Two-pronged), Straight for FIBERKNOT® Soft Ligament Anchor-Dia. 1.5mm & 1.8mm
10041 Spear (Two-pronged), Curved for FIBERKNOT® Soft Ligament Anchor- Dia. 1.5mm & 1.8mm
10042 Trocar, Straight for FIBERKNOT® Soft Ligament Anchor- Dia. 1.5mm & 1.8mm
10043 Trocar, Curved for FIBERKNOT® Soft Ligament Anchor- Dia. 1.5mm & 1.8mm
10045 Drill bit, Dia. 1.5mm for FIBERKNOT® Soft Ligament Anchor- Dia. 1.5mm & 1.8mm (SS)
10046 Drill bit, Dia. 1.5mm, for FIBERKNOT® Soft Ligament Anchor- Dia. 1.5mm & 1.8mm (Nitinol)
MINI-VIM PK� Ligament Anchor (PEEK) MINI-VIM PK® Ligament Anchor (PEEK) View Details

MINI-VIM PK® Ligament Anchor (PEEK)

Mini-Vim PK suture anchors (PEEK)

The MINI-VIM PK® Ligament anchors are available in a variety of sizing and suture options. The MINI-VIM PK® is a non-absorbable PEEK suture anchor with a material eyelet which provides superior abrasion resistance due to PEEK's low coefficient of friction. Anchor insertion and delivery are made simple by drilling through a spear and inserting the anchor through the same spear into the drilled hole. MINI-VIM PK® Ligament anchor is Tap-in/Bang-on anchor. It is available in 3 sizes, 2.8mm (single loaded), 3.0mm (double loaded) & 3.5mm (double loaded).

The average pull-out strength of MINI-VIM PK® 2.8mm ligament anchor is 221.0 N*, MINI-VIM® II PK 3.0mm ligament anchor is 127.1 N* & MINI-VIM® II PK 3.5mm ligament anchor is 368.8 N*.

Ordering Information

BAS-9086.28F MINI-VIM PK® Ligament Anchor, PEEK, loaded with 1 pc Fiber, Dia 2.8mm
BAS-9088.30F MINI-VIM® II PK Ligament Anchor, PEEK, loaded with 2 pc Fiber, Dia. 3.0mm
BAS-9089.35F MINI-VIM® II PK Ligament Anchor, PEEK, loaded with 2 pc Fiber, Dia. 3.5mm

Related Instrumentation

BAS-9110 Spear (Two-pronged) for MINI-VIM PK ® II PK Ligament Anchor BAS-9088.30F & BAS-9089.35F
BAS-9097 Spear (Fishmouth) for MINI-VIM PK ® II PK Ligament Anchor BAS-9088.30F & BAS-9089.35F
BAS-9098 Trocar for BAS-9097 & BAS-9110
BAS-9100 Drill bit, Dia. 2.4mm for MINI-VIM PK ® Ligament Anchor- (BAS-9086.28F)
BAS-9101 Drill bit, Dia. 2.6mm for MINI-VIM® II PK Ligament Anchor (BAS-9088.30F)
BAS-9102 Drill bit, Dia. 3.0mm for MINI-VIM® II PK Ligament Anchor (BAS-9089.35F)
MINI-VIM Ligament Anchor (Titanium) MINI-VIM® Ligament Anchor (Titanium) View Details

MINI-VIM® Ligament Anchor (Titanium)

MINI-VIM� Ligament Anchor (Titanium)

The MINI-VIM® Ligament anchors are titanium anchors available in 2.8mm and 3.5mm diameters and come preloaded with USP #2 suture. In most cases, the implant can be manually inserted using the handled version. A drill is available for use in hard bone if desired. For arthroscopic applications, the MINI-VIM® Ligament anchor can be inserted through the small diameter MINI-VIM® spear eliminating the need for a cannula. This is ideal for SLAP and subscapularis repairs where a small stab incision and percutaneous delivery of the implant is preferred. MINI-VIM® Ligament anchor is Screw-in anchor.

The average pull-out strength of MINI-VIM® 2.8mm ligament anchor is 176N.

Key Features

  • Tremendous pull-out strength.
  • Self-drilling. A drill is available for use in hard bone if desired.
  • Preloaded with One USP #2 fiber in a single-use sterile pack
  • Also available in needled version.

Ordering Information

BAS-9001.28F MINI-VIM® Ligament Anchor, Titanium loaded with 1 pc Fiber; Dia. 2.8mm
BAS-9040.28F MINI-VIM® Ligament Anchor, Titanium, loaded with 1 pc Fiber with needle, Dia. 2.8mm
BAS-9031.35F MINI-VIM® Ligament Anchor, Titanium, loaded with 1 pc Fiber, Dia. 3.5mm
BAS-9083.35F MINI-VIM® Ligament Anchor, Titanium, loaded with 1 pc Fiber with needle, Dia. 3.5mm

Related Instrumentation

BAS-9012 Spear (Two-pronged) for MINI-VIM® & MINI-VIM®PK Ligament Anchor - BAS-9001.28F, BAS-9031.35F & BAS-9086.28F
BAS-9109 Spear (Fishmouth)for MINI-VIM® & MINI-VIM® PK Ligament Anchor - BAS-9001.28F, BAS-9031.35F & BAS-9086.28F
BAS-9013 Trocar for Spear - BAS-9012 & BAS-9109
BAS-9026 Drill bit, Dia. 2.2mm for MINI-VIM® Ligament Anchor BAS-9001.28F & BAS-9040.28F
BAS-9114 Drill bit, Dia.2.8mm for MINI-VIM® Ligament Anchor BAS-9031.35F & BAS-9083.35F
MINI-VIM PK� Ligament Anchor (PEEK, Knotless) MINI-VIM PK® Ligament Anchor (PEEK, Knotless) View Details

MINI-VIM PK® Ligament Anchor (PEEK, Knotless)

MINI-VIM PK� Ligament Anchor (PEEK, Knotless)

The MINI-VIM PK® Ligament anchor is available in dia of 2.8mm and 3.5mm. The MINI-VIM PK® is a nonabsorbable PEEK suture anchor with a material eyelet which provides superior abrasion resistance due to PEEK's low coefficient friction. The knotless technology of MINI-VIM PK® Ligament anchor Provides a step-saving alternative to conventional "knotted" suture anchors and eliminates "knot stacks" associated with soft tissue irritation.

The average pull-out strength of MINI-VIM PK® 2.8mm ligament anchor is 228.6 N*

Ordering Information

BAS-9087.28F MINI-VIM PK® Ligament Anchor, PEEK, Knotless, Dia. 2.8mm
BAS-9192.35F MINI-VIM PK® Ligament Anchor, PEEK, Knotless, Dia. 3.5mm

Related Instrumentation

BAS-9127 Sleeve for MINI-VIM PK® Ligament Anchor, Knotless - BAS-9087.28F
BAS-9111 Drill bit, Dia.2.5mm for MINI-VIM PK® Ligament Anchor, Knotless BAS-9087.28F

Rotator Cuff Repair

FIBERKNOT� Ligament Anchors (All Suture) FIBERKNOT® Ligament Anchors (All Suture) View Details

FIBERKNOT® Ligament Anchors (All Suture)

FIBERKNOT� Ligament Anchors (All Suture)

With strong fixation, less bone removal and a simple, self-punching technique, the FIBERKNOT® helps overcome the trade-offs of other rotator cuff fixation methods. FIBERKNOT® anchors can help streamline procedures with a fast-efficient technique that eliminates the need to create and find a pilot hole. In addition to requiring less bone removal than larger traditional anchors, the small 2.9mm footprint provides placement and fixation advantages when bone real estate is limited, especially during revisions. The average pullout strength of FIBERKNOT® 2.9mm ligament anchor is 528.5 N*.

Available in double loaded with various combination of Fiber and Fiber Tape.



Ordering Information

10031 FIBERKNOT® Soft Ligament Anchor loaded with 2 pc Fiber, Dia. 2.9mm
10032 FIBERKNOT® Soft Ligament Anchor loaded with 1 pc Fiber and 1 pc White-Blue Fiber Tape size 1.4, Dia. 2.9mm
10033 FIBERKNOT® Soft Ligament Anchor loaded with 1 pc Fiber and 1 pc White-Black Fiber Tape size 1.4, Dia. 2.9mm
VIMFIX-PK� Ligament Anchor VIMFIX-PK® Ligament Anchor (Knotted for Primary or Medial row) View Details

VIMFIX-PK® Ligament Anchor (Knotted for Primary or Medial row)

VIMFIX-PK� Ligament Anchor

The VIMFIX-PK® is a fully threaded suture anchor featuring dual threads to maximize cortical and cancellous fixation, has a covered saddle tip to protect the sutures and is cannulated to channel growth factors. The average pullout strength of VIMFIX-PK® ranges from 334.8 N to 357.5 N. The VIMFIX-PK® anchor is manufactured with PEEK material which is a thermoplastic material with excellent biocompatibility and biostability characteristics.

  • Clinical Used for Primary or Medial Row Fixation
  • Fully threaded; Cancellous and cortical threads provide exceptional fixation strength
  • Broaching punch minimizes cortical stress fractures
  • Available in Double & triple loaded options
  • Enhanced tip thread profile for easy insertion
  • Provides initial fixation strength and stability
  • Technique-create hole using Punch or Punch / Tap, then screw-in the anchor
  • Available in 4.5mm and 5.5mm diameters
  • Available with fiber & fiber tape combination for greater footprint contact pressure on cuff.


Ordering Information

BAS-9141.45F VIMFIX-PK® Ligament Anchor, PEEK, loaded with 2 pc Fiber, Dia. 4.5mm
BAS-9145.45F VIMFIX-PK® III Ligament Anchor, PEEK, loaded with 3 pc Fiber, Dia. 4.5mm
BAS-9090.55F VIMFIX-PK® Ligament Anchor, PEEK, loaded with 2 pc Fiber, Dia. 5.5mm
BAS-9091.55F VIMFIX-PK® III Ligament Anchor, PEEK, loaded with 3 pc Fiber, Dia. 5.5mm
BAS-9180.45FT VIMFIX-PK® Ligament Anchor, PEEK, loaded with 1 pc Blue Fiber and 1 pc White-Blue Fiber Tape size 1.4, Dia. 4.5mm
BAS-9181.45FT VIMFIX-PK® Ligament Anchor, PEEK, loaded with 1 pc White-Blue Fiber and 1 pc Blue Fiber Tape size 1.4, Dia. 4.5mm
BAS-9182.55FT VIMFIX-PK® Ligament Anchor, PEEK, loaded with 1 pc Blue Fiber and 1 pc White-Blue Fiber Tape size 1.4, Dia. 5.5mm
BAS-9183.55FT VIMFIX-PK® Ligament Anchor, PEEK, loaded with 1 pc White-Blue Fiber and 1 pc Blue Fiber Tape size 1.4, Dia. 5.5mm

Related Instrumentation

BAS-9112 Punch for VIMFIX-PK® Dia 4.5mm & 5.5mm and VIMFIX-LR® Dia 4.75mm & 5.5mm
BAS-9103 Punch / Tap for VIMFIX-PK® Dia 4.5mm & 5.5mm and VIMFIX-LR® Dia 4.75mm & 5.5mm
VIMFIX�-LR Ligament Anchor VIMFIX®-LR Ligament Anchor (Knotless for Lateral row) View Details

VIMFIX®-LR Ligament Anchor (Knotless for Lateral row)

VIMFIX-PK� Ligament Anchor

The VIMFIX®-LR is a fully-threaded, knotless anchor designed for use with BioFiber suture or BioFiber® Tape in rotator cuff repair using the bridge techniques. It provides maximum pull-out and insertion strength while saving time. The simple knotless technique consists of passing sutures or tapes through tissue, loading them through the closed VIMFIX®-LR eyelet which is then inserted into a bone socket. Tension is visualized, adjusted and locked into position with the VIMFIX®-LR anchor body. VIMFIX®-LR anchor is cannulated and vented to minimize material and to allow for potential bony ingrowth. The anchor is available in 4.75mm and 5.5mm diameter, and PEEK material which is a thermoplastic material with excellent biocompatibility and bio-stability characteristics.

The VIMFIX®-LR is twist-in knotless anchor. The anchor is available in two variants, one is VIMFIX®-LRP and other is VIMFIX®-LRT. VIMFIX®-LRP with a PEEK body and a PEEK eyelet. VIMFIX®-LRT with a PEEK body and a metal (titanium) eyelet. The VIMFIX®-LR can be used in the Knotless double-row rotator cuff repair technique.

The average pullout strength of VIMFIX®-LRP 5.5mm ligament anchor is 588.7 N*, VIMFIX®-LRP 4.75mm is 503.4 N*, VIMFIX®-LRT 5.5mm is 646.7 N* & VIMFIX®-LRT 4.75mm is 575.7 N*.

Ordering Information

BAS-9092.55F VIMFIX®-LRP Ligament Anchor, PEEK, knotless, Dia. 5.5mm
BAS-9142.475F VIMFIX®-LRP Ligament Anchor, PEEK, knotless, Dia. 4.75mm
BAS-9136.55F VIMFIX®-LRT Ligament Anchor, PEEK, knotless, self-tapping, metal tip, Dia. 5.5mm
BAS-9143.475F VIMFIX®- LRT Ligament Anchor, PEEK, knotless, self-tapping, metal tip, Dia. 4.75mm

Related Instrumentation

BAS-9112 Punch for VIMFIX-PK® Dia 4.5mm & 5.5mm and VIMFIX-LR® Dia 4.75mm & 5.5mm
BAS-9103 Punch / Tap for VIMFIX-PK® Dia 4.5mm & 5.5mm and VIMFIX-LR® Dia 4.75mm & 5.5mm
SUPER-VIM� Ligament Anchor (Titanium) SUPER-VIM® Ligament Anchor (Titanium) View Details

SUPER-VIM® Ligament Anchor (Titanium)

SUPER-VIM� Ligament Anchor (Titanium)

The SUPER-VIM® design incorporates a cancellous thread with a very small core diameter to maximize pull-out strength in cancellous or osteoporotic bone. Each SUPER-VIM® comes with two or three #2 fiber sutures of contrasting colors to maximize soft tissue fixation and allow suture identification. The SUPER-VIM® anchors have two suture eyelets to minimize the possibility of having the second suture lock after the first suture is tied.

The average pull-out strength of SUPER-VIM® is 563N.

Available in 5.0mm and 6.5mm diameters with color-coded anchors and high strength UHMWPE fiber.

Key Features

  • Anchors made of Ti 6AI-4V ELI Titanium Alloy.
  • Multiple fiber dispense load over more of the tendon
  • Independent fiber channels reduce suture binding
  • Needlepoint tip permits atraumatic hand insertion through soft tissue.
  • Anchor's wide threads and small core optimize bone purchase.
  • Self-tapping design
  • Fully-threaded anchor body increases resistance to pull-out.
  • Laser etched markings on the drivers for insertion depth and suture orientation
  • 5.0mm and 6.5mm ligament anchors are also available with needles, ideal for mini-open rotator cuff repair procedures.

Ordering Information

BAS-9002.50F SUPER-VIM® Ligament Anchor, Titanium, loaded with 2 pc Fiber, Dia. 5.0mm
BAS-9041.50F SUPER-VIM® Ligament Anchor, Titanium, loaded with 2 pc Fiber with needle, Dia. 5.0mm
BAS-9030.50F SUPER-VIM® III Ligament Anchor, Titanium, loaded with 3 pc Fiber, Dia. 5.0mm
BAS-9084.65F SUPER-VIM® L Ligament Anchor, Titanium, loaded with 2 pc Fiber, Dia. 6.5mm
BAS-9115.65F SUPER-VIM® L Ligament Anchor, Titanium, loaded with 2 pc Fiber with needle, Dia. 6.5mm

Biceps Tenodesis Repair

VIMFIX�-BT Ligament Anchor (Knotless) VIMFIX®-BT Ligament Anchor (Knotless) View Details

VIMFIX®-BT Ligament Anchor (Knotless)

VIMFIX�-BT Ligament Anchor (Knotless)

The VIMFIX®-BT Tenodesis implants are designed for all-arthroscopic proximal biceps tenodesis. The efficient system is designed to save steps and minimize the length of the procedure. The implants feature a unique PEEK tip that is used to steer the biceps tendon to the bottom of the bone socket without the need to externalize or whipstitch the tendon. There is no need to predetermine tendon length, as position and tension are easily set and visualized prior to final anchor insertion.

Strong fixation is obtained by simply advancing the preloaded VIMFIX®-BT Tenodesis Screw. The system also features Tenodesis Fluted Solid reamers with built-in guide tips that eliminate the need to ream over a guide pin. The average pull-out strength of VIMFIX®-BT ligament anchor (knotless) is 470.8 N*.



Ordering Information

BAS-9093.50F VIMFIX®-BT Ligament Anchor, PEEK, knotless, Dia. 5.0mm
BAS-9094.60F VIMFIX®-BT Ligament Anchor, PEEK, knotless, Dia. 6.0mm
BAS-9095.70F VIMFIX®-BT Ligament Anchor, PEEK, knotless, Dia. 7.0mm
BAS-9096.80F VIMFIX®-BT Ligament Anchor, PEEK, knotless, Dia. 8.0mm

Related Instrumentation

BAS-9113 Graft Sizer for Biceps Tendon, Dia.5- 6-7-8 mm
BAS-9104 Fluted Reamer Solid, Dia. 5.0mm
BAS-9105 Fluted Reamer Solid, Dia. 6.0mm
BAS-9106 Fluted Reamer Solid, Dia. 7.0mm
BAS-9107 Fluted Reamer Solid, Dia. 8.0mm
BAS-9108 Fluted Reamer Solid, Dia. 9.0mm

AC Joint Repair

AC-FIX Fixation button AC-FIX Fixation button View Details

AC-FIX Fixation button

AC-FIX Fixation button

The AC-FIX button allows the use of multiple Biofiber tape for AC Joint reconstruction, providing a construct that as strong as current AC Joint repair devices. Since the buttons are attached with the Biofiber tape independently. Only suture material is passed through the clavicle and coracoid tunnels allowing the repair to be completed through smaller tunnel.

BAK-7003AF AC-FIX Fixation Button

BioFiber®, BioFiber® Loop & BioFiber® Tape

Biofiber Biofiber® View Details

Biofiber®

Biofiber

BioFiber® is a braided sterile surgical fiber prepared from fibres of ultra-high molecular weight long chain linear polyethylene. BioFiber® elicit a minimal of inflammatory reaction in tissues, followed by gradual encapsulation of the fiber by the fibrous tissue. BioFiber® is non-absorbable and there are no significant changes in tensile strength retention known to occur in vivo. BioFiber® is preloaded on many Biotek Anchors that have fibers. BioFiber® represents a major advancement in arthroscopic surgery.

Ordering Information

BF-2W BioFiber® Fiber USP Size 2 with MO-6 needle White, Len. 36"
BF-2WC BioFiber® Fiber USP Size 2 with MO-6 needle, White-Blue, Len. 36"
BF-2WK BioFiber® Fiber USP Size 2 with MO-6 needle, White-Black, Len. 36"
BF-2WCK BioFiber® Fiber USP Size 2 with MO-6 needle, White-Blue-Blue-Black, Len. 36"
BF-4IN1.S2 BioFiber® Fiber USP Size 2 with 40mm Taper cut needle, Len. 60cms Pack contains 4 units (White, White-Blue, White-Black & Solid Blue)
BF-5W BioFiber® Fiber USP Size 5 with MO-6 needle White, Len. 36"
BF-5WC BioFiber® Fiber USP Size 5 with MO-6 needle White-Blue, Len. 36"
BF-5WK BioFiber® Fiber USP Size 5 with MO-6 needle White-Black, Len. 36"
BF-WWB BioFiber® Fiber USP Size 2 Len. 36" Pack contains 2 units (White with needle & White-Blue with needle)
Biofiber Tape Biofiber® Tape View Details

Biofiber® Tape

Biofiber Tape

BioFiber® Tape is an ultra-high strength 2 mm width tape using a similar long chain polyethylene structure as the BioFiber® suture. In addition to high demand applications like AC joint reconstruction, knotless double-row rotator cuff repair & Foot & Ankle repair surgeries. The broad footprint of the BioFiber® Tape is appropriate for repairs in degenerative cuff tissue where tissue pull-through may be a concern.

Ordering Information

BF-2BST BioFiber® Fiber Tape, size 2 White-Black, Len. 39"
BF-16SST BioFiber® Fiber Tape, size 1.6 White-Blue, Len. 39"
BF-2ST BioFiber® Fiber Tape, size 2, White-Blue, Len. 39"
10022 BioFiber® Fiber Tape, size 1.4, White-Blue, Len. 39"
10023 BioFiber® Fiber Tape, size 1.4, Blue, Len. 39"
10024 BioFiber® Fiber Tape, size 1.4, White-Black, Len. 39"
Biofiber Loop BioFiber® Loop View Details

BioFiber® Loop

Biofiber Loop

BioFiber® Loop is a continuous loop of BioFiber® with straight needle. The needles are easy to handle and move freely on the suture to recenter themselves after passing through tissue and facilitating even tension. Graft preparation using BioFiber® Loop in conjunction with the Whipstitch technique drastically reduces time spent preparing the graft, uniformly compresses the graft, improves strength and allows for last minute adjustments in graft length.

BF-2WSB BioFiber® Fiber Loop, Size 2 with straight needle, Len. 6cm White-Blue, Len. 24"
BIOTRAC LD Kit Assembly for shoulder positioning BIOTRAC LD Kit Assembly for shoulder positioning View Details

BIOTRAC LD Kit Assembly for shoulder positioning

Assembly for shoulder Traction

This versatile system provides safe, effective and easy positioning of the shoulder during all types of arthroscopic or open shoulder surgeries performed in the lateral decubitus position. It permits ideal shoulder positioning for improved access to the anterior glenohumeral joint. It provides simple patient set-up, access and adjustability. Stainless steel construction.

The Assembly attaches easily to standard O.T. table Rails.

BAS-9195 BIOTRAC LD Kit Assembly for shoulder positioning (Lateral Decubitus Position)
Switching Stick Switching Stick View Details

Switching Stick

Switching Stick
  • Ideal for maintaining proper portal sites
  • Available in non-cannulated version.
  • Can be used at both ends.
BAS-9003 Switching Stick
Labral Probe Labral Probe View Details

Labral Probe

Labral Probe
  • The tip of the probe can be used to test the strength of a soft tissue repair or to probe defects.
  • Enables the surgeon to easily insert an instrument through a small stab incision in soft tissue.
BAS-9005 Labral Probe
Crochet Hook Crochet Hook View Details

Crochet Hook

Crochet Hook
  • A simple tool that performs well in tight spaces to retrieve BioFiber loops during arthroscopic Bankart, SLAP, rotator cuff, or any suturing procedure.
  • The smooth tip prevents abrasion of Biofiber strands.
  • Ergonomic handle facilitates instrument manipulation in the wet arthroscopic environment.
  • The push-pull design was designed to push Biofiber knots and/or retrieve Biofibers with the same instrument.
BAS-9006 Crochet Hook
Knot Pusher Knot Pusher View Details

Knot Pusher

Knot Pusher
  • Modified handle that provides an ergonomic feel.
  • Modified distal tip for easier advancement of slipknots and halfhitches.
BAS-9007 Knot Pusher
Tissue Elevators Tissue Elevators View Details

Tissue Elevators

Tissue Elevators
  • Used in arthroscopic instability repair for tissue release from glenoid rim.
  • Available in 15° and 30° angles.
  • Available in "up" and "down" versions.
BAS-9075 Tissue Elevator 15°- Up
BAS-9008 Tissue Elevator 15°- Down
BAS-9009 Tissue Elevator 30°- Down
Glenoid Rasps Glenoid Rasps View Details

Glenoid Rasps

Glenoid Rasps
  • Used in arthroscopic instability repair for debridement and glenoid rim preparation.
  • Available in "up" and "down" versions.
BAS-9010 Glenoid Rasp- Up
BAS-9011 Glenoid Rasp- Down
Ring Curette Ring Curette View Details

Ring Curette

Ring Curette
  • For shoulder mini-open and arthroscopic procedures.
BAS-9028 Ring Curette
Reusable Suture Passer Reusable Suture Passer View Details

Reusable Suture Passer

Reusable Suture Passer

The Suture Passer has various curved tip configurations for arthroscopic Bankart, SLAP & rotator cuff repairs. The Suture Passer can be preloaded with a Nitinol loop or p-dioxanone suture (PDS�) or nylon monofilament suture to accomplish a simple shuttle step to pass suture through the tissue. The Suture Passer features a thumb pad for one-hand wire advancement. These are available in various tip configurations of straight, 25 degree curved and 45 degree curved.

BAS-9117L Reusable Suture Passer, 45°, Left
BA5-9118R Reusable Suture Passer, 45°, Right
BAS-9119L Reusable Suture Passer, 25°, Left
BAS-9120R Reusable Suture Passer, 25°, Right
BAS-9121 Reusable Suture Passer, Crescent, Straight
BAS-9125 Nitinol Loop Wire for Reusable Suture Passer
Biofiber Cutter Suture Cutter View Details

Suture Cutter

Biofiber Cutter

The Suture Cutter was designed to facilitate arthroscopic cutting of sutures and braided sutures. The uniquely designed cutting jaws remain sharp throughout repeated use.

BAS-9085 Suture Cutter
Suture Retriever Suture Retriever View Details

Suture Retriever

Suture Retriever
  • Designed for atraumatic BioFiber retrieval and manipulation during arthroscopic procedures.
  • The jaws create a closed loop which allows the BioFiber to slide freely during suture extraction.
BAS-9025 Suture Retriever
Suture Grasper with Manipulator Suture Grasper with Manipulator View Details

Suture Grasper with Manipulator

Suture Grasper with Manipulator

The Suture Grasper with manipulator enables the surgeon to perform multiple tasks with one tool, improving speed and efficiency of the procedure. The Suture Grasper with manipulator is the optimal tool for arthroscopic suture grasping, as well as suture retrieval / management.

BAS-9079 Suture Grasper With Manipulator
Tissue Grasper Tissue Grasper View Details

Tissue Grasper

Tissue Grasper

The uniquely designed jaw of the Tissue Grasper enables the surgeon to perform multiple tasks in arthroscopic surgery with one instrument, improving speed and efficiency of the procedure. The tissue grasper is the optimal tool for arthroscopic tissue grasping/ reduction, foreign body removal, as well as suture retrieval/management. The distal serrated tip of the jaws function as a tissue and suture grasper while the proximal section of the jaws facilitate slide through suture retrieving.

BAS-9126 Tissue Grasper
SHUTTLE FERRY II Suture Passer SHUTTLE FERRY® II Suture Passer View Details

SHUTTLE FERRY® II Suture Passer

SHUTTLE FERRY II Suture Passer

Designed specifically for rotator cuff procedures, the SHUTTLE FERRY® from BIOTEK offers surgeons simple, one handed operation and precise control over jaw positioning. Simultaneous suture passing and retrieval makes the suture passing step technically easier and can help your procedures run smoothly.

BAS-9169 SHUTTLE FERRY® II Suture Passer for Rotator cuff repair
BAS-9170 Needle for SHUTTLE FERRY® II- suture passer (Nitinol)
Graphic Case for Shoulder Arthroscopy Graphic Case for Shoulder Arthroscopy View Details

Graphic Case for Shoulder Arthroscopy

Graphic Case for Shoulder Arthroscopy
  • Vertically Stacked Accessibility
  • Removable Tray inserts
BAS-9018 Graphic Case for Shoulder Arthroscopy Instruments (Small)
BAS-9037 Graphic Case for Shoulder Arthroscopy Instruments (Large)
Onbutton CL ONButton CL® View Details

ONButton CL®

Onbutton

New CL construct
Continuous loop of suture braid eliminates the need for knot tying and allows for a larger portion of graft to reside in the tunnel.

Efficient
Preloaded with braided sutures (#7 Biofiber®, white-blue as Pulling/leading suture and #5 polyester, green as Flipping suture)for added procedure efficiency.

Greater strength
Tested for UTS-Ultimate Tensile Strength. Meets or exceeds 2200 N. Highest failure load compared to competitive technologies

Accommodates various graft lengths
One size titanium button is available with multiple pre-measured loop sizes of 12, 15, 20, 25, 30, 35, 40mm lengths.

Truly endoscopic procedure
Does not require a second incision.

Solid fixation for either primary or auxiliary fixation in ACL or PCL reconstruction.

Clinically Proven
Supported by over 100000 cases of clinical success all over India and abroad.

Promotes insertion site healing
Rests on the cortical bone surface

Strong cortical fixation
Provides dependable fixation regardless of cancellous bone quality

Provides tactile "flipping" feedback
Ensures proper seating of device

Hassle-free revision surgeries
Standard technique allows for arthroscopic revision without lateral incision and bone removal

Most comprehensive line of femoral fixation solutions
Can be used in Single-Bundle soft tissue fixation; Double-Bundle soft tissue fixation; Bone-Tendon-Bone fixation

Ordering Information

BAK-7001C.12 ONButton CL® Fixation Button, loop size 12mm
Pulling Fiber: White-Blue, Flipping Fiber: Green
BAK-7001C.15 ONButton CL® Fixation Button, loop size 15mm
Pulling Fiber: White-Blue, Flipping Fiber: Green
BAK-7001C.20 ONButton CL® Fixation Button, loop size 20mm
Pulling Fiber: White-Blue, Flipping Fiber: Green
BAK-7001C.25 ONButton CL® Fixation Button, loop size 25mm
Pulling Fiber: White-Blue, Flipping Fiber: Green
BAK-7001C.30 ONButton CL® Fixation Button, loop size 30mm
Pulling Fiber: White-Blue, Flipping Fiber: Green
BAK-7001C.35 ONButton CL® Fixation Button, loop size 35mm
Pulling Fiber: White-Blue, Flipping Fiber: Green
BAK-7001C.40 ONButton CL® Fixation Button, loop size 40mm
Pulling Fiber: White-Blue, Flipping Fiber: Green

Related Instrumentation

BAK-7052 Endoscopic Reamer, Dia. 4.5mm Cannulated
BAK-7118 Endoscopic Reamer, Dia. 4.7mm for ONButton CL® Cannulated
Buttonfix BUTTONFIX® View Details

BUTTONFIX®

Buttonfix

Very strong fixation and unique design for graft protection

The BUTTONFIX® Fixation Button with Adjustable Loop provides Leading strength and incorporating a unique design to help protect the graft during loop reduction. Single loop size of BUTTONFIX® can be universally used with any graft length. The graft support frame protects the graft from damage and any abrasion. UTS-Ultimate Tensile Strength of BUTTONFIX® is 1300 N.

Features

  • Maximized graft in tunnel
  • Double locking loop mechanism
  • Preloaded with braided sutures (white as pulling suture and green as flipping suture)
  • Requires minimal force to reduce loop
  • Compatible with common extension devices
  • Familiar Loop Reduction Procedure

Ordering Information

BAK-7195 BUTTONFIX® Fixation Button with Adjustable Loop

Related Instrumentation

BAK-7052 Endoscopic Reamer, Dia. 4.5mm Cannulated
BAK-7118 Endoscopic Reamer, Dia. 4.7mm for ONButton CL® Cannulated
Biotwin<sup>™</sup> Interference Screw, Biocomposite Biotwin Interference Screw, Biocomposite View Details

Biotwin Interference Screw, Biocomposite

Biotwin� Interference Screw, Biocomposite

Biocompatible Interference Resorbable Screw
Biotwin was designed to fulfill two core aims: provide appropriate mechanical properties necessary for ligament reconstruction whilst ensuring a regulated resorption and osteointegration to form architectural bone through hydrolysis*.

Canulated Resorbable Screw Design
The thread is specific to each screw diameter so as to systematically provide the maximum amount of contact between implant and bone.

Biotwin� Interference Screw, Bio composite

75% PLDLLA & 25% BCP: the convenient ratio between the necessary mechanical resistance for the indication and the faculty to generate bone growth
Manufactured by Biomatlante, France

Ordering Information

BT11CPVI0720 BIOTWIN Composite Interference Screw 7*20mm
BT08CPVI0725 BIOTWIN Composite Interference Screw 7*25mm
BT08CPVI0730 BIOTWIN Composite Interference Screw 7*30mm
BT11CPVI0820 BIOTWIN Composite Interference Screw 8*20mm
BT08CPVI0825 BIOTWIN Composite Interference Screw 8*25mm
BT08CPVI0830 BIOTWIN Composite Interference Screw 8*30mm
BT11CPVI0920 BIOTWIN Composite Interference Screw 9*20mm
BT08CPVI0925 BIOTWIN Composite Interference Screw 9*25mm
BT08CPVI0930 BIOTWIN Composite Interference Screw 9*30mm
BT12CPVI1025 BIOTWIN Composite Interference Screw 10*25mm
BT08CPVI1030 BIOTWIN Composite Interference Screw 10*30mm
BT15CPVI1135 BIOTWIN Composite Interference Screw 11*35mm
BT15CPVI1235 BIOTWIN Composite Interference Screw 12*35mm
SOFTFIX-PK Interference screws, cannulated SOFTFIX-PK® Interference screw, PEEK View Details

SOFTFIX-PK® Interference screw, PEEK

SOFTFIX-PK Interference screws, cannulated
  • SOFTFIX-PK® Interference Screws provide strong mechanical fixation for both bone patellar tendon-bone (BTB) and soft tissue grafts in ACL and PCL reconstruction.
  • SOFTFIX-PK® Interference Screws feature a thread pattern that allows for a simple surgical technique, with minimal tunnel preparation.
  • Non-absorbable SOFTFIX-PK® interference screw incorporates PEEK-VESTAKEEP® polymer from Evonik®.
  • PEEK-VESTAKEEP® material exhibits an ideal combination of strength, stiffness and toughness which surpasses absorbable materials.
  • PEEK (Poly-Ether-Ether-Ketone) is a thermoplastic material with excellent biocompatibility and bio stability characteristics as per ASTM F2026.
  • SOFTFIX-PK® interference screws offer the revision ability of an absorbable screw.
  • PEEK has inherent radiolucent characteristics that have widely gained confidence and acceptance in the medical community.

Ordering Information

BAK-7164.15 SOFTFIX-PK® Interference screw, cannulated, roundhead; Dia. 5 .0mm, Len. 15mm
BAK-7164.20 SOFTFIX-PK® Interference screw, cannulated, roundhead, Dia. 5 .0mm, Len. 20mm
BAK-7165.23 SOFTFIX-PK® Interference screw, cannulated, roundhead, Dia. 6 .0mm, Len. 23mm
BAK-7166.23 SOFTFIX-PK® Interference screw, cannulated, roundhead, Dia. 7 .0mm, Len. 23mm
BAK-7166.28 SOFTFIX-PK® Interference screw, cannulated, roundhead, Dia. 7 .0mm, Len. 28mm
BAK-7167.23 SOFTFIX-PK® Interference screw, cannulated, roundhead, Dia. 8 .0mm, Len. 23mm
BAK-7167.28 SOFTFIX-PK® Interference screw, cannulated, roundhead, Dia. 8 .0mm, Len. 28mm
BAK-7168.23 SOFTFIX-PK® Interference screw, cannulated, roundhead, Dia. 9 .0mm, Len. 23mm
BAK-7168.28 SOFTFIX-PK® Interference screw, cannulated, roundhead, Dia. 9 .0mm, Len. 28mm
BAK-7168.35 SOFTFIX-PK® Interference screw, cannulated, roundhead, Dia. 9 .0mm, Len. 35mm
BAK-7169.28 SOFTFIX-PK® Interference screw, cannulated, roundhead, Dia. 10 .0mm, Len. 28mm
BAK-7169.35 SOFTFIX-PK® Interference screw, cannulated, roundhead, Dia. 10 .0mm, Len. 35mm
BAK-7170.35 SOFTFIX-PK® Interference screw, cannulated, roundhead, Dia. 11 .0mm, Len. 35mm

Related Instrumentation

Guide Wire for SOFTFIX-PK® interference screws

Single use (SS), includes calibration marks to assist in screw

BAK-7191 Guide Wire for SOFTFIX-PK® Interference Screws Dia. 1.2mm; Len. 300mm (SS)
BAK-7180 Guide Wire for SOFTFIX-PK® Interference Screws Dia. 1.2mm; Len. 300mm (Nitinol)

Cannulated screwdriver for SOFTFIX-PK® interference screws

Cannulated for ease of use with guide wires.

BAK-7161 Screwdriver for SOFTFIX-PK®PEEK Interference Screws Cannulated
SOFTFIX Interference Screws, cannulated, roundheaded, Titanium SOFTFIX® Interference screws, Titanium View Details

SOFTFIX® Interference screws, Titanium

SOFTFIX Interference screws, cannulated, Titanium
  • Specifically designed for endoscopic femoral fixation where graft protection is needed.
  • Polished, fully radiused threads provide maximum graft protection.
  • Wide-bore cannulation for easy guide wire insertion and removal.
  • The Taper-Tip style offers sharper initiating threads and a more pronounced taper for faster, easier insertion.
  • Designed to reduce the possibility of bone plug migration during placement.
  • Round head reduces possibility of graft damage during or after implantation.
  • Universal screw for either tibial or femoral applications.
  • Standard 4.5mm hex for easy insertion and removal.
  • Cannulated for use with a guide wire.
  • Material -Titanium alloy.

Ordering Information

BAK-7128.20S SOFTFIX® Interference screw, cannulated, roundhead, Dia. 7.0mm, Len. 20mm
BAK-7128.25S SOFTFIX® Interference screw, cannulated, roundhead, Dia. 7.0mm, Len, 25mm
BAK-7128.30S SOFTFIX® Interference screw, cannulated, roundhead, Dia. 7.0mm, Len. 30mm
BAK-7101.20S SOFTFIX® Interference screw, cannulated, roundhead, Dia. 8.0mm, Len. 20mm
BAK-7101.25S SOFTFIX® Interference screw, cannulated, roundhead, Dia. 8.0mm, Len. 25mm
BAK-7101.30S SOFTFIX® Interference screw, cannulated, roundhead, Dia. 8.0mm, Len. 30mm
BAK-7102.20S SOFTFIX® Interference screw, cannulated, roundhead, Dia. 9.0mm, Len. 20mm
BAK-7102.25S SOFTFIX® Interference screw, cannulated, roundhead, Dia. 9.0mm, Len. 25mm
BAK-7102.30S SOFTFIX® Interference screw, cannulated, roundhead, Dia. 9.0mm, Len. 30mm
BAK-7114.20S SOFTFIX® Interference screw, cannulated, roundhead, Dia. 10.0mm, Len. 20mm
BAK-7114.25S SOFTFIX® Interference screw, cannulated, roundhead, Dia. 10.0mm, Len. 25mm
BAK-7114.30S SOFTFIX® Interference screw, cannulated, roundhead, Dia. 10.0mm, Len. 30mm

Related Instrumentation

Guide Wire for SOFTFIX® interference screws

Single use (SS), includes calibration marks to assist in screw placement.

BAK-7120 Guide Wire forSOFTFIX® Interference Screws Dia. 2.0mm; Len. 300mm (SS)
BAK-7183 Guide Wire forSOFTFIX® Interference Screws Dia. 2.0mm; Len. 300mm (Nitinol)

Cannulated screwdriver for SOFTFIX® interference screws

Cannulated for ease of use with guide wires.

BAK-7063 Screwdriver for SOFTFIX® Titanium Interference Screws Cannulated
Onbutton ONButton View Details

ONButton

Onbutton

The titanium button is the original endoscopic femoral soft tissue fixation device.

It can be used for single incision, soft tissue, or bone-tendon-bone fixation.

Ordering Information

BAK-7001 ONButton Fixation Button
Low-Profile Cancellous Screws And Spiked Washers LOW PROFILE cancellous bone screw And SPIKED WASHER View Details

LOW PROFILE cancellous bone screw And SPIKED WASHER

Low- Profile Cancellous Screws And Spiked Washers
  • The low-profile screw and washer combination provides 31% to 50% lower profile than competitive versions.
  • Low profile cancellous screw and spiked washer set provide continuous strength for soft tissue fixation to bone.
  • Low profile head to reduce soft tissue irritation.
  • Can be used as a post screw for suture or soft tissue fixation.
  • Ideal for ACL, PCL, collateral ligament or posteriolateral reconstruction.
  • Unique washer design with spikes on the inferior surface provides excellent fixation of soft tissue to bone.
  • Low profile cancellous screws available in diameter 4.0mm and 6.5mm. Spiked washers also available in small and large size accordingly.
  • Material -Titanium alloy.

Ordering Information

BAK-7129.30S LOW PROFILE cancellous bone screw, cannulated, Dia. 4.0mm, Len. 30mm
BAK-7129.35S LOW PROFILE cancellous bone screw, cannulated, Dia. 4.0mm, Len. 35mm
BAK-7129.40S LOW PROFILE cancellous bone screw, cannulated, Dia. 4.0mm, Len. 40mm
BAK-7006.35S LOW PROFILE cancellous bone screw, cannulated, Dia. 6.5mm, Len. 35mm
BAK-7006.40S LOW PROFILE cancellous bone screw, cannulated, Dia. 6.5mm, Len. 40mm
BAK-7130S SPIKED WASHER for 4.0mm cancellous screw
BAK-7010S SPIKED WASHER for 6.5mm cancellous screw
Tibial Post Fixation Screw TIBIAL POST® fixation screw View Details

TIBIAL POST® fixation screw

Tibial Post Fixation Screw

Used to securely trap attached sutures and bulky suture knots atraumatically under the low-profile head to eliminate soft tissue irritation.

  • Available in diameter 6.5mm and lengths 30,35 and 40mm
  • Material-Titanium alloy.

Ordering Information

BAK-7011.30S TIBIAL POST® fixation screw, Dia. 6.5mm, Len. 30mm
BAK-7011.35S TIBIAL POST® fixation screw, Dia. 6.5mm, Len. 35mm
BAK-7011.40S TIBIAL POST® fixation screw, Dia. 6.5mm, Len. 40mm
STAYFIX Spiked Ligament Staple STAYFIX® Spiked Ligament staple View Details

STAYFIX® Spiked Ligament staple

STAYFIX Spiked Ligament Staple
  • The staple fixation system provides a simple means of attaching tissue to bone.
  • Low-profile, wide staple base provides better load distribution.
  • Spike-post leg design encourages uninterrupted vascular flow to the underlying tissue.
  • Sharp leg points for easier penetration into cortical bone.
  • Two pronged implant for superior pull out strength.
  • Fixation staples are available in two sizes.
  • Material-Titanium alloy.

Ordering Information

BAK-7013S STAYFIX® Spiked Ligament staple, Size Small
BAK-7015S STAYFIX® Spiked Ligament staple, Size Large

Related Instrumentation

Used in ACL reconstruction for impaction of spiked ligament staples.

BAK-7064 Impactor for STAYFIX®Spiked Ligament Staple
SUTUREFIX Tibial Base Plates SUTUREFIX® Tibial Base Plates View Details

SUTUREFIX® Tibial Base Plates

SUTUREFIX Tibial Base Plates
  • Used for tibial fixation of the ACL and PCL graft.
  • Indirect extra-articular fixation of tibial-end of the graft.
  • Available in round hole.
  • Material -Titanium alloy.

Ordering Information

BAK-7080S SUTUREFIX® Tibial base plate, round hole
SMARTFIX Tibial Base Plates SMARTFIX Tibial Base Plates View Details

SMARTFIX Tibial Base Plates

SMARTFIX Tibial Base Plates
  • It is the upgraded version of tibial base plate.
  • It may be used for tibial fixation of the graft in Cruciate reconstruction technique (All Inside ACL reconstruction technique)
  • The two cutting edges of button helps in holding and twisting to further tense the graft. The serration provided on the bottom side helps to lock the button on the tibial cortex.
  • It is available in two sizes - Medium and Large. Medium size can be used with the tunnel dia. of 7 and 8mm. Large size can be used with the tunnel dia. of 9, 10 and 11mm.

Ordering Information

BAK-7221S SMARTFIX, Tibial Base Plate, Size Medium
BAK-7222S SMARTFIX, Tibial Base Plate, Size Large
ONLoc� Drill Guide System ONLoc® Drill Guide System View Details

ONLoc® Drill Guide System

ONLoc� Drill Guide System

A highly precise drill guide available for cruciate reconstruction-The ONLoc® Drill Guide conforms to each patient's anatomy, offering surgeons flexibility, accuracy and control. The ONLoc® Drill Guide System is compact for easier handling and added control. It was designed not only to fit comfortably in the surgeon's hand, but to accommodate the full spectrum of knee anatomy.

The key features of the ONLoc® Drill Guide are:

  • A dovetail arm design.
  • An ergonomic guide handle precisely fitted for the surgeon's hand.
  • Simple locking mechanism for one-handed operation of the guide.
  • Light-weight and compact for added control.
  • A bullet for engaging the cortex more consistently and securely.
  • A rectangular guide arm cross section that is more rigid than round cross section designs.

ONLoc® Drill Guide System Set Components

  • ONLoc® Drill Guide: Our most rigid, accurate drill guide, designed for easy, single-handed placement.
  • ONLoc® ACL Elbow Aimer: For drilling to the laser mark at the aimer's elbow; useful when the ACL stump is not removed from the tibia.
  • ONLoc® ACL Tip Aimer: For drilling to the tip of the aimer; useful when the ACL stump is completely removed from the tibia.
  • ONLoc® PCL Tibial Aimer: Rigid design along with calibrated tip results in consistent, accurate guide wire placement; broad face of tip easily passes through notch and provides a means of protecting posterior capsule during guide wire drilling.
  • ONLoc® PCL Femoral Aimer: For outside in drilling with medial incision. Rigid design along with calibrated tip results in consistent accurate guide wire placement; hoop tip provides a visual reference for the diameter of the fully reamed tunnel, helping avoid tunnel encroachment on the articular surface.
  • ONLoc® Angled Bullet: Tip angle matches the engagement angle of the ONLoc® Drill Guide on the tibia for secure placement.
  • OnLoc® Four-Point Bullet: : Four sharp points for secure engagement of the ONLoc® Drill Guide at any angle.

Ordering Information

BAK-7035 ONLoc® Drill Guide
BAK-7035(a) ONLoc® Angled Bullet, 2.4mm ID
BAK-7035(b) ONLoc® ACL Elbow Aimer
BAK-7035(c) ONLoc® PCL Tibial Aimer
BAK-7035(d) ONLoc® PCL Femoral Aimer
BAK-7035(e) ACL Tip Aimer

Note : ONLoc® guide systems are available in sets ONLY. Individual components not supplied separately.

Drill Bit Passing Pins / Graft Passing Guide Pins Drill Bit Passing Pin / Graft Passing Pins (Beath Pin) View Details

Drill Bit Passing Pin / Graft Passing Pins (Beath Pin)

Drill Bit Passing Pins / Graft Passing Guide Pins

The pins are used as guide wires for making the tibial and femoral tunnels in ACL-PCL surgeries.

Ordering Information

BAK-7036 Drill Bit Passing Pin Dia. 2.4mm; Len. 250mm
BAK-7037 Drill Tip Graft Passing Pin, (Beath Pin) Dia. 2.4mm; Len. 355mm
BAK-7116 Trocar- Tip Graft Passing Pin, (Beath Pin) Dia. 2.4mm; Len. 355mm
BAK-7203 Spade- Tip Graft Passing Pin, (Beath Pin) Dia. 4.7mm; Len. 355mm
FLOWERTIP Cannulated Femoral Reamers FLOWERTIP® Femoral Reamer, Cannulated View Details

FLOWERTIP® Femoral Reamer, Cannulated

FLOWERTIP Cannulated Femoral Reamers
  • Suited for an endoscopic ACL technique whereby the femoral tunnel is reamed from inside-out while minimizing the risk of injury to the PCL.
  • Drill bit shaft is etched with depth marks on three sides for easy identification of bone tunnel depth.
  • Facilitates open femoral tunnel preparation and in-line tunnel reaming for endosteal fixation procedures.
  • Head profile permits easy withdrawal from bone tunnels.
  • Available in diameters ranging from 6mm to 12mm.

Ordering Information

BAK-7045.60 FLOWERTIP® Femoral Reamer, Dia. 6.0mm Cannulated
BAK-7045.65* FLOWERTIP® Femoral Reamer, Dia. 6.5mm Cannulated
BAK-7045.70 FLOWERTIP® Femoral Reamer, Dia. 7.0mm Cannulated
BAK-7045.75* FLOWERTIP® Femoral Reamer, Dia. 7.5mm Cannulated
BAK-7045.80 FLOWERTIP® Femoral Reamer, Dia. 8.0mm Cannulated
BAK-7045.85* FLOWERTIP® Femoral Reamer, Dia. 8.5mm Cannulated
BAK-7045.90 FLOWERTIP® Femoral Reamer, Dia. 9.0mm Cannulated
BAK-7045.95* FLOWERTIP® Femoral Reamer, Dia. 9.5mm Cannulated
BAK-7045.10 FLOWERTIP® Femoral Reamer, Dia. 10.0mm Cannulated
BAK-7045.105* FLOWERTIP® Femoral Reamer, Dia. 10.5mm Cannulated
BAK-7045.11 FLOWERTIP® Femoral Reamer, Dia. 11.0mm Cannulated
BAK-7045.115* FLOWERTIP® Femoral Reamer, Dia. 11.5mm Cannulated
BAK-7045.12 FLOWERTIP® Femoral Reamer, Dia. 12.0mm Cannulated
CANNUDRILL Cannulated Tibial Reamers CANNUDRILL Cannulated Tibial Reamers View Details

CANNUDRILL Cannulated Tibial Reamers

CANNUDRILL Cannulated Tibial Reamers
  • Used for drilling bone tunnels in ACL and PCL reconstruction procedures.
  • Cannulated for use with a 2.4mm drill tip guide pin.
  • Graduated depth marks on three sides for easy identification of bone tunnel depth.
  • Available in diameters ranging from 6mm to 12mm.

Ordering Information

BAK-7038.60 CANNUDRILL® Tibial Reamer, Dia. 6.0mm Cannulated
BAK-7038.65* CANNUDRILL® Tibial Reamer, Dia. 6.5mm Cannulated
BAK-7038.70 CANNUDRILL® Tibial Reamer, Dia. 7.0mm Cannulated
BAK-7038.75* CANNUDRILL® Tibial Reamer, Dia. 7.5mm Cannulated
BAK-7038.80 CANNUDRILL® Tibial Reamer, Dia. 8.0mm Cannulated
BAK-7038.85* CANNUDRILL® Tibial Reamer, Dia. 8.5mm Cannulated
BAK-7038.90 CANNUDRILL® Tibial Reamer, Dia. 9.0mm Cannulated
BAK-7038.95* CANNUDRILL® Tibial Reamer, Dia. 9.5mm Cannulated
BAK-7038.10 CANNUDRILL® Tibial Reamer, Dia. 10.0mm Cannulated
BAK-7038.105* CANNUDRILL® Tibial Reamer, Dia. 10.5mm Cannulated
BAK-7038.11 CANNUDRILL® Tibial Reamer, Dia. 11.0mm Cannulated
BAK-7038.115* CANNUDRILL® Tibial Reamer, Dia. 11.5mm Cannulated
BAK-7038.12* CANNUDRILL® Tibial Reamer, Dia. 12.0mm Cannulated
Depth Gauges For ACL/PCL reconstruction Depth Gauges For ACL/PCL reconstruction View Details

Depth Gauges For ACL/PCL reconstruction

Depth Gauges For ACL/PCL reconstruction

Depth Gauge is used to measure the total tunnel length of the femur in ACL-PCL surgeries.

Ordering Information

BAK-7053 Depth Gauge for ACL/PCL reconstruction
SURESHOT Transtibial Femoral Aimer SURESHOT Transtibial Femoral Aimer View Details

SURESHOT Transtibial Femoral Aimer

SURESHOT Transtibial Femoral Aimer
  • Used in ACL reconstruction to create the portal socket in order to place the graft passing pin.
  • Available for placing the graft passing pin through transtibial portals.
  • Available in offset sizes of 5mm, 6mm and 7mm.

Ordering Information

BAK-7054.05 SURESHOT Transtibial Femoral Aimer 5mm
BAK-7054.06 SURESHOT Transtibial Femoral Aimer 6mm
BAK-7054.07 SURESHOT Transtibial Femoral Aimer 7mm
LOCUS Transportal Femoral Aimer LOCUS Transportal Femoral Aimer View Details

LOCUS Transportal Femoral Aimer

LOCUS Transportal Femoral Aimer
  • Used in ACL reconstruction to create the portal socket in order to place the graft passing pin.
  • Available for placing the graft passing pin through transportal or anteromedial portal.
  • Available in offset sizes of 5mm, 6mm and 7mm.
BAK-7055.05 LOCUS Transportal Femoral Aimer 5mm
BAK-7055.06 LOCUS Transportal Femoral Aimer 6mm
BAK-7055.07 LOCUS Transtibial Femoral Aimer 7mm
Bone Tunnel Plugs Bone Tunnel Plugs View Details

Bone Tunnel Plugs

Tunnel Plugs
  • Helps to control fluid loss while providing a sealed instrumental portal.
  • Made of Polyacetal.
  • Available in sizes 7-8mm, 8-9mm and 9-10mm.
BAK-7056.78 Bone Tunnel Plug 7-8 mm
BAK-7056.89 Bone Tunnel Plug 8-9 mm
BAK-7056.910 Bone Tunnel Plug 9-10 mm
Tunnel Dilators/T-handle for tunnel dilators Tunnel Dilators/T-handle for tunnel dilators View Details

Tunnel Dilators/T-handle for tunnel dilators

Tunnel Dilators/T-handle for tunnel dilators
  • Used to expand tibial and femoral tunnels while compressing the cancellous bone without drilling.
  • Tapered ends allow for easy insertion and removal of the dilators from the femoral or tibial tunnel.
  • Full radiused depth marks in 5mm increments.
  • T-Handle-ergonomic styling allows for an easy grip and manoeuvrability; built in locking quick connector; allows for easy intraoperative changing, as minimizing the potential for the units to separate during use.
  • Available in diameters ranging from 6mm to 10mm.
  • Also available in cannulated versions.

Ordering Information

BAK-7057.06 Tunnel Dilator 6mm
BAK-7057.07 Tunnel Dilator 7mm
BAK-7057.08 Tunnel Dilator 8mm
BAK-7057.09 Tunnel Dilator 9mm
BAK-7057.10 Tunnel Dilator 10mm
BAK-7086.06 Tunnel Dilator Cannulated, 6mm
BAK-7086.07 Tunnel Dilator Cannulated, 7mm
BAK-7086.08 Tunnel Dilator Cannulated, 8mm
BAK-7086.09 Tunnel Dilator Cannulated, 9mm
BAK-7086.10 Tunnel Dilator Cannulated, 10mm
BAK-7062 T-Handle for Tunnel Dilators
Arthroscopic Probes Arthroscopic Probes View Details

Arthroscopic Probes

Arthroscopic Probes
  • Ergonomically designed calibrated probe allows the surgeon to accurately quantify pathology.
  • Unique handle gives a firm grip and aid in instrument control.
  • All straight probes have etched graduations in 5mm increments.
  • Probes are limited-reuse and may be disinfected, steam autoclaved or ethylene oxide sterilized.

Ordering Information

BAK-7065 Arthroscopic Probe
Microfracture Awls Microfracture Awls View Details

Microfracture Awls

Microfracture Awls
  • Allow the creation of localized vascular access channels in chondral defects.
  • Used for chondral resurfacing.
  • Also useful to mark intended drill sites in all ACL/PCL procedures.
  • Available in various angles.

Ordering Information

BAK-7143 Microfracture Awl, 20°
BAK-7066 Microfracture Awl, 30°
BAK-7167 Microfracture Awl, 45°
BAK-7144 Microfracture Awl, 60°
Graft Sizing Block Graft Sizing Block View Details

Graft Sizing Block

Graft Sizing Block

It is used to check diameter of the graft in ACL / PCL Reconstruction surgeries. Available in two versions. For sizes 6mm to 12mm(6/7/8/9/l0/11/12mm) 8 sizes 6.5mm to 11.5mm(6.5/7.5/8.5/9.5/10.5/11.5mm).

BAK-7070 Graft Sizing Block for Dia. 6-7-8-9-10-11-12 mm
BAK-7124 Graft Sizing Block for Dia. 6.5-7.5-8.5-9.5-10.5-11.5 mm
Rasps Rasps View Details

Rasps

Straight/Convex/Half-round Rasps
  • Bone shaping devices especially suited for notchplasties.
  • Available in various shapes and sizes, (straight/convex/half-round)

Ordering Information

BAK-7075 Straight Rasp
BAK-7076 Convex Rasp
BAK-7077 Half-Round Rasp
Tunnel Notcher Tunnel Notcher View Details

Tunnel Notcher

Tunnel Notcher

The tunnel notcher removes a pathway of cancellous bone adjacent to the femoral tunnel. This vacant pathway will enhance guide wire placement and facilitate easier screw insertion.

BAK-7126 Tunnel Notcher
Graft Prep Station Graft Prep Station View Details

Graft Prep Station

Graft Prep Station

This fully modular system plays a key role during ACL and PCL reconstructive surgeries to prepare soft tissue and bone-tendon-bone autografts or allografts like patellar tendon, quadriceps tendon, semi-tendinosous and gracilis tendons.

The system allows the surgeon to interchange the various components to clean, whip stitch, measure, pre-tension, or add a fixation device. The sizing block, sold separately, can accommodate grafts from 6 to 12mm increments.

The Tension Clamp helps in pre-tensioning of the graft for those surgeons who feel it is necessary for satisfactory post-op results. The Graft Clamps are designed to act as an extra set of hands and incorporate atraumatic teeth to prevent damage to the graft.

Ordering Information

BAK-7069 Graft Prep Station includes GraftBoard, Sliding Base, Button Holder with scale, Graft Grasper Clamp-Left & Right and Suture Holder with Tensioner
Tendon Stripper Tendon Stripper View Details

Tendon Stripper

Tendon Strippers, Closed/Open
  • For safe retrieval of semitendinosus and gracilis tendons for ACL and PCL reconstruction procedures.
  • Allows for full thickness tendons to be harvested without damage to surrounding soft tissue
  • Closed design allows full, 360° enclosure for the tendon.
  • Allows the hamstring tendons to be harvested proximally without detaching them from the tibia.
  • The diameter of the stripper is large enough to accommodate the broadest semitendinosus tendon and the tip is sufficiently dull to prevent premature amputation of the graft.
  • Available in closed and open versions.
  • Available in sizes 6mm, 7mm and 8mm.

Ordering Information

BAK-7071.06 Tendon Stripper, Closed End, Dia: 6mm
BAK-7071.07 Tendon Stripper, Closed End, Dia: 7mm
BAK-7071.08 Tendon Stripper, Closed End, Dia: 8mm
BAK-7073.06 Tendon Stripper, Closed End, Dia: 6mm
BAK-7073.07 Tendon Stripper, Closed End, Dia: 7mm
BAK-7073.08 Tendon Stripper, Closed End, Dia: 8mm
Notchplasty curette Notchplasty curette View Details

Notchplasty curette

Notchplasty curette

Designed specifically to facilitate the removal of soft tissue and bone from the notch during notchplasty

Ordering Information

BAK-7095 Notchplasty Curette
PCL Elevators PCL Elevator View Details

PCL Elevator

PCL Elevators
  • Sharp elevator tip elevates the PCL and periosteum from the bone when used in the fore/aft plane.
  • Blunt elevator sides open the posterior compartment when used in a rotational motion.
  • Wire capture hole secures the wire while reaming the tibial tunnel, protecting the neurovascular structures from the drill tip as it exits the posterior cortex.
BAK-7083 PCL Elevator
PCL Rasp PCL Rasp View Details

PCL Rasp

PCL Rasp

A bone shaping device especially suited for notchplasty

BAK-7160 PCL Rasp
PCL Curette PCL Curette View Details

PCL Curette

PCL Curette

Designed specifically to facilitate the removal of soft tissue and bone during PCL Reconstruction

Ordering Information

BAK-7184 PCL Curette
Graphic Cases for Knee Arthroscopy Instruments Graphic Cases for Knee Arthroscopy Instruments View Details

Graphic Cases for Knee Arthroscopy Instruments

Graphic Cases for Knee Arthroscopy Instruments

The BIOTEK ACL-PCL Reconstruction Instrumentation Set is a complete system of instruments for the accurate arthroscopic reconstruction during single-bundle ACL and PCL reconstruction procedures. The system components are sized for both bone-tendon-bone and soft tissue grafts.

Ordering Information

10037 Graphic Case for ACL Reconstruction (Small)
BAK-7159 Graphic Casefor ACL Reconstruction (Large)
BAK-7079 Graphic Casefor ACL Reconstruction (Small)
BAK-7145 Graphic Casefor ACL-PCL Reconstruction (Large)
Meniscal Repair (Inside-Out Technique) BIOCINCH® Meniscal repair set (Inside-Out Technique) View Details

BIOCINCH® Meniscal repair set (Inside-Out Technique)

Meniscal Repair (Inside-Out Technique)

BIOCINCH® Meniscal repair set comprises of two straight meniscal repair needles preloaded with USP size 2-0 or 0 suture. Meniscal repair needles are made of nitinol, and are ultrathin and strong, yet flexible for easy passage through guide sleeves. The suture is made of UHMWPE material provides ultra-high strength.

Ordering Information

BAK-7196 BIOCINCH® Meniscal repair set with needles Fiber USP Size 2-0, suture Len. 75cm straight needles-2 units, needle Len. 25cm
BAK-7216 BIOCINCH® Meniscal repair set with needles Fiber USP Size 0, suture Len. 75cm straight needles-2 units, needle Len. 25cm

Instruments

The BIOCINCH® Meniscal repair set has been designed to address meniscal tears in the anterior, middle and posterior zones of the meniscus using an "inside out" approach. The single lumen and double lumen pre-bent guide sleeves feature easy passage of needles, effective suture placement- vertical &horizontal, and to access easily on different zones of meniscus.The Curved Probe measures the width of the meniscus. The angled tip of the Meniscal Rasp is ideally shaped to access inside the meniscal tear for debridement prior to repair. Simple to learn and replicate.

Ordering Information

BAK-7198 Curved Probefor Meniscus Repair
BAK-7199 Meniscus Rasp
BAK-7204 Meniscus Curette
BAK-7200 Guide Sleeve (Double Lumen) for Meniscus Repair, Straight
BAK-7201 Guide Sleeve (Double Lumen)for Meniscus Repair, Curved, Left
BAK-7202 Guide Sleeve (Double Lumen)for Meniscus Repair, Curved, Right
BAK-7211 Guide Sleeve (Single Lumen)for Meniscus Repair, Straight
BAK-7212 Guide Sleeve (Single Lumen)for Meniscus Repair, Curved, 10°
BAK-7213 Guide Sleeve (Single Lumen)for Meniscus Repair, Curved, 20°
BAK-7214 Guide Sleeve (Single Lumen)for Meniscus Repair, Curved, 30°
BAK-7215 Guide Sleeve (Single Lumen)for Meniscus Repair, Curved, 40°
BAK-7205 Needle Pusher
BAK-7206 Sleeve Bender
BAK-7217 Graphic Case for Meniscus Repair Instruments
PIVOT-FIX� PIVOT-FIX View Details

PIVOT-FIX

PIVOT-FIX�

low profile design Ideal for the tunnel in meniscus root repair. Flat Button fits on tibia side. Open and close holes combination to pass the sutures and slide sutures easily

Ordering Information

BAK-7002PF PIVOT-FIX Fixation Button
MICRO-VIM� Ligament Anchor (Titanium) MICRO-VIM Ligament Anchor (Titanium) View Details

MICRO-VIM Ligament Anchor (Titanium)

MICRO-VIM� Ligament Anchor (Titanium)

BIOTEK offers two titanium anchors in 1.8- and 2.0-mm diameter sizes, giving you a comprehensive range of anchors to meet your procedural needs. MICRO-VIM Ligament Anchor is made of radiopaque titanium. No predrilling required.

Depending on the fixation strength, MICRO-VIM Ligament Anchor provides varieties of suture combinations. MICRO-VIM Ligament Anchor Dia. 1.8 mm is packaged with one-piece USP 2-0

BioFiber® sutures with tapered needles. MICRO-VIM Ligament Anchor Dia. 2.0 mm is packaged with one-piece USP 0 BioFiber® sutures with tapered needles.

Ordering Information

BAS-9161.18F MICRO-VIM Ligament Anchor, Titanium loaded with 1 pc Fiber USP 2-0 with needle, Dia. 1.8mm
BAS-9162.20F MICRO-VIM Ligament Anchor, Titanium loaded with 1 pc Fiber USP 0 with needle, Dia. 2.0 mm

Related Instrumentation

BAS-9148 Drill bit, Dia. 1.5mm for MICRO-VIM Ligament Anchor BAS-9162.20F
BAS-9149 Drill bit, Dia. 1.3mm for MICRO-VIM Ligament Anchor BAS-9161.18F
BAS-9150 Slotted Sleeve for MICRO-VIM & MICRO-VIM PK Ligament Anchor BAS-9161.18F, BAS-9162.20F, BAS-9163.18F & BAS-9164.20F
MICRO-VIM� PK Ligament Anchor (PEEK) MICRO-VIM PK Ligament Anchor (PEEK) View Details

MICRO-VIM PK Ligament Anchor (PEEK)

MICRO-VIM� PK Ligament Anchor (PEEK)

BIOTEK offers two titanium anchors in 1.8- and 2.0-mm diameter sizes, giving you a comprehensive range of anchors to meet your procedural needs. MICRO-VIM PK Ligament Anchor is made of radiolucent PEEK-VESTAKEEP® polymer from Evonik®, a biocompatible, stable polymer with a modulus comparable to cortical bone.

MICRO-VIM PK Ligament Anchor has Tap-in design, suited for hard-bone matrix. Fine depth control to aid in cortical bone fixation

Depending on the fixation strength, MICRO-VIM PK Ligament Anchors provide varieties of suture combinations. MICRO-VIM PK Ligament Anchor Dia. 1.8 mm is packaged with one-piece USP 2-0 BioFiber® sutures with tapered needles. MICRO-VIM Ligament Anchor Dia. 2.0 mm is packaged with one-piece USP 0 BioFiber® sutures with tapered needles.

Ordering information

BAS-9163.18F MICRO-VIM PK Ligament Anchor, PEEK loaded with 1 pc Fiber USP 2-0 with needle, Dia. 1.8mm
BAS-9164.20F MICRO-VIMPK Ligament Anchor, PEEK loaded with 1 pc Fiber USP 0 with needle, Dia. 2.0 mm

Related Instrumentation

BAS-9146 Drill bit, Dia. 1.7mm for MICRO-VIM PK Ligament Anchor BAS-9164.20F
BAS-9147 Drill bit, Dia. 1.5mm for MICRO-VIM PK Ligament Anchor BAS-9163.18F
BAS-9150 Slotted Sleeve for MICRO-VIM & MICRO-VIM PK Ligament Anchor BAS-9161.18F, BAS-9162.20F, BAS-9163.18F & BAS-9164.20F